Product Reviews

SmallRig 1138 Super Camera Clamp Review

A versatile clamp for creators who need to mount a lightweight camera or accessory to a rod, tube, table, or frame.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

This SmallRig 1138 camera clamp review looks at a compact mounting option for creators who want to position a camera or accessory without drilling into a surface.

Its clamp, dual ball head, 1/4"-20 screw, and included action camera adapter suit lightweight rigs that need flexible placement.

SmallRig 1138 Clamp Review Summary

The quick verdict

SmallRig 1138 Super Camera Clamp
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Super Camera Clamp

A versatile clamp for creators who need to mount a lightweight camera or accessory to a rod, tube, table, or frame.

  • Dual ball head mount with a 1/4"-20 screw for compatible cameras and accessories.
  • Super clamp secures to a rod, tube, table, frame, or tripod using a locking knob.
  • Maximum load capacity is 1.5 kg.
  • Constructed from aluminum and stainless steel; item weight is 0.2 kg.

Pros

  • Combines clamping and adjustable ball-head positioning in one compact mount.
  • Offers several support-point options, including rods, tables, frames, and tripods.

Consider before buying

  • The 1.5 kg maximum makes it a poor fit for heavier camera and accessory combinations.
  • The best setup depends on having a support point with a suitable shape and diameter; check the intended mounting spot before buying.
Read the full review summary

The SmallRig 1138 combines a super clamp with a dual ball head and 1/4"-20 screw, so it can attach compatible gear and then secure the assembly to a rod, tube, table, frame, or tripod.

Its stated maximum load is 1.5 kg, and the aluminum and stainless steel construction keeps the unit at 0.2 kg. An included action camera adapter adds a direct option for compatible action cameras.

This design is most compelling for desk setups, vehicle or bike footage, and small camera rigs where a clamp can reach a suitable support point.

The ball head offers positioning flexibility, while the locking knob is intended to secure the clamp to its mounting surface.

Buyers should account for the 1.5 kg maximum, check that their support surface and device interface fit, and use the recommended safety rope in dynamic setups.

The buying factors

SmallRig 1138 Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

The clamp can attach to several support types, and the dual ball head helps with positioning.

8/10

Device compatibility

A 1/4"-20 screw and action camera adapter cover several common lightweight camera accessories.

7/10

Load capacity

The 1.5 kg maximum accommodates lightweight gear, with a clear limit for heavier setups.

8/10

Build materials

Aluminum and stainless steel construction gives the mount a metal build.

6/10

Dynamic setup suitability

It is presented for settings including vehicles and bikes, but the instructions call for a safety rope in dynamic use.

8/10

Setup simplicity

The clamp and locking knob allow attachment to a support without drilling.

Key Features and Specifications of SmallRig 1138 Clamp

  • Dual ball head mount with a 1/4"-20 screw for compatible cameras and accessories.
  • Super clamp secures to a rod, tube, table, frame, or tripod using a locking knob.
  • Maximum load capacity is 1.5 kg.
  • Constructed from aluminum and stainless steel; item weight is 0.2 kg.
  • Includes a super camera clamp mount and an action camera mount adapter.
  • Designed for a range of gear including cameras, monitors, lights, microphones, webcams, and action cameras.

Pros and Cons of SmallRig 1138 Clamp

Pros

  • Combines clamping and adjustable ball-head positioning in one compact mount.
  • Offers several support-point options, including rods, tables, frames, and tripods.
  • The 1/4"-20 connection and included action camera adapter support different lightweight rig configurations.
  • Metal construction keeps the mount's listed weight to 0.2 kg.

Consider before buying

  • The 1.5 kg maximum makes it a poor fit for heavier camera and accessory combinations.
  • The best setup depends on having a support point with a suitable shape and diameter; check the intended mounting spot before buying.
  • For moving or dynamic use, a separate safety rope is recommended, adding another item to rig and manage.

Who Should Buy SmallRig 1138 Clamp?

Good fit

Consider the SmallRig 1138 if you want to mount a compact camera, action camera, light, microphone, or similar accessory to a convenient rod, tube, table, frame, or tripod.

The included action camera adapter and 1/4"-20 screw give you options for compatible gear, and the dual ball head helps aim it after clamping.

It is particularly suited to creators building a lightweight desktop or vehicle setup who value the ability to clamp to different support points.

Before choosing it, compare your full device-and-accessory load with the 1.5 kg maximum, confirm the support point is compatible, and plan to attach a safety rope for dynamic scenarios.

Who should skip it

Skip this mount if your planned rig exceeds 1.5 kg or if you need a dedicated mounting solution for a particular camera interface that is not covered by its 1/4"-20 screw or action camera adapter.

Check the device connection and clamp placement requirements before committing.

Choose another approach if your setup has no suitable rod, tube, table, frame, or tripod location to clamp onto, or if adding a safety rope in a moving setup would be impractical.

SmallRig 1138 Clamp: Fit and Setup Considerations

A clamp that needs a good anchor point

The 1138's flexibility starts with the surface or structure it can grip. A rod, tube, table, frame, or tripod gives it a potential mounting location without requiring a drilled hole.

Measure or otherwise confirm the intended support point is suitable for the clamp before planning a shot, especially when a vehicle or other moving setup is involved.

Positioning with the dual ball head

Once the clamp is attached, the dual ball head provides a way to orient the mounted gear. The 1/4"-20 screw supports compatible cameras and accessories, while the included action camera adapter adds another mounting route.

Check that your device can connect to one of these interfaces and that the intended angle remains practical with the clamp in its chosen position.

Keep the payload within the limit

The listed maximum load is 1.5 kg, so buyers should consider the combined weight of the mounted device and any attached accessories. A lighter camera or accessory setup fits the stated design more naturally than a heavy rig.

In dynamic scenarios, the product instructions recommend attaching a safety rope to help guard against an accidental drop.

What the package provides

The package includes the super camera clamp mount and an action camera mount adapter.

That gives buyers the main clamping hardware and one adapter, but the supplied components do not establish that every possible camera connection or support-point combination will fit. Verify the gear interface and mounting location for your own rig.

Alternatives to SmallRig 1138 Clamp

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Magic Arm Clamp Kit

Consider the 9.8-inch kit if you want the extra reach of an articulating arm and its clamp's listed jaw range suits your support.

The 1138 is the more direct option when its compact dual ball head and included action camera adapter match your intended arrangement.

  • This kit includes a super clamp and a 9.8-inch articulating arm with 1/4" screws at both ends.
  • The clamp has 1/4" and 3/8" threads, and its jaw opens from 15 mm to 54 mm.
  • The 1138 combines a clamp with a dual ball head and action camera adapter; its stated maximum load is 1.5 kg.

Camera Mounts & Clamps alternative

SmallRig Super Clamp with 1/4- and 3/8-Inch Threads
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp with 1/4- and 3/8-Inch Threads

Choose the standalone clamp if you mainly need a clamp with threaded attachment points and do not need the 1138's supplied dual ball head and action camera adapter.

The 1138 better suits buyers looking for those positioning and adapter features together.

  • This is a standalone super clamp with 1/4" and 3/8" threaded holes.
  • Its jaw opens from 15 mm to about 40 mm, and it is made from aluminum alloy and stainless steel.
  • The 1138 provides a dual ball head, 1/4"-20 screw, and action camera adapter, with a stated maximum load of 1.5 kg.

Is SmallRig 1138 Clamp Worth It?

The SmallRig 1138 Super Camera Clamp is worth considering for lightweight rigs that need a flexible attachment point and adjustable camera or accessory positioning.

Its multiple support options, dual ball head, 1/4"-20 screw, and included action camera adapter make it useful for desk, vehicle, or similar setups.

Keep the 1.5 kg maximum load and recommended safety rope in dynamic scenarios in mind.

It is a sensible fit when your gear interface and clamping location are compatible; buyers with heavier equipment or a need for a different mounting arrangement should choose a mount designed for that setup.

Your review at a glance

SmallRig 1138 Super Camera Clamp
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Super Camera Clamp

A versatile clamp for creators who need to mount a lightweight camera or accessory to a rod, tube, table, or frame.

  • Dual ball head mount with a 1/4"-20 screw for compatible cameras and accessories.
  • Super clamp secures to a rod, tube, table, frame, or tripod using a locking knob.
  • Maximum load capacity is 1.5 kg.
  • Constructed from aluminum and stainless steel; item weight is 0.2 kg.

Written by

c-double.com Editorial Team

Editorial team

c-double.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 1138 Super Camera Clamp

SmallRig 1138 Super Camera Clamp

A versatile clamp for creators who need to mount a lightweight camera or accessory to a rod, tube, table, or frame.

  • Dual ball head mount with a 1/4"-20 screw for compatible cameras and accessories.
  • Super clamp secures to a rod, tube, table, frame, or tripod using a locking knob.
Check Video Reviews on Amazon